Fiber Light Cable For Rigid Endoscope
Material:Bundle Diameter:
2.5 / 3.5 / 4.8 mm or other
Cable Length:
1m ~ 5m
Sheathing:
Universal light guide: Stainless Armor + Mesh Grid + Silicone tube
Color of Sheathing: Grey, Blue
End Processing:
Bonded / Temperature Resistance 200°
Fused / Temperature Resistance 350°
Logo:
Can be customized on both end
Universal Light Cables are compatible with different stainless steel connectors, allowing versatile use of the light sources for different endoscopes, and it can be selected according to the specific requirements of users. The common type of light guide cable with bonded/glued end-surface treatment of the fiber suitable for Halogen light source, temperature resistance is 200°. For the high performance with fused fiber cables provide high temperature resistance which up to 350° at the light source end.
Features:
- High Temperature Resistance and High Pressure
- High White Light Transmission with low color shift
- Stainless Steel Coil plus Nylon Mesh Grid for internal protection
- Medical Grade silicone for External protection
- Suitable for fully Autoclave, 134℃, 3bar, 10mins
- Versatility color of sheathing available
wdt_ID Fiber end treatment Bonded (Glued) Fiber Fused Fiber
1
Transmission: Cable length = 3m
CA~50%
CA~70%
39
Bundle diameter
φ1.8mm /φ2.5mm /φ3.5mm /φ4.8mm or on request
same as Bonded (Glued) Fiber Type's
40
Length of cable
1.8m / 2.5m / 3.0m / 3.5m or upon request
same as Bonded (Glued) Fiber Type's
41
Connector Compatible
Carl Storz / Olympus / Wolf/ Stryker/ ACMI / or customized
same as Bonded (Glued) Fiber Type's
43
Available Light Source
Halogen
LED , Xenon
44
Temperature Resistance
150°~200° for the Bonded/Glued Fiber end treatment
350° for the Fused Fiber end treatment
45
Minimum Bending Radius
50mm
50mm
46
Sheathing
Universal light guide: Stainless Armor + Mesh Grid + Silicone tube Color of Sheathing - Grey, Blue, White
same as Bonded (Glued) Fiber Type's
47
Sterilization method
Autoclaving 134℃, 10 min , >100 cycles
Autoclaving 134℃, 10 min , >100 cycles
The cables can be manufactured with different end-surface treatment of fiber.
1/Bonded or Glued
Bonded fiber cables are filled out with high temperature adhesives in between the spaces, temperature resistance 200°
2/Fused (on the light source end)
Fused fiber cables are made by high pressure and heat on the light source end, temperature resistance 350°. In comparison with bonded fiber cables, they have the following benefits.
-
Provide 20%~30% more light transmission on the light source end
-
Increase the ability to withstand high temperature and light intensities
-
Used with high intensity Xenon light sources
3/Extremely fused (on both end)
Extremely hot fused fiber cables are made by high pressure and heat on both end, temperature resistance 350°. In comparison with the other two, they have the following benefits.
-
Provide 20%~30% more light transmission on both end
-
Increase the ability to withstand high temperature and light intensities
-
Used with high intensity Xenon light sources
|
|
|
Connector: The light source end and endoscope end of universal guide light cable adopts metric thread, which is compatible with general commercial connector and matches various light sources of different endoscope.
Fiber Light Cables for Surgical (operation) Microscope
-
Fiber Light Cables adapted to Zeiss (straight connector)
-
Fiber Light Cables adapted to Zeiss (angled connector)
-
Fiber Light Cables adapted to Leica
Fiber Light Cables for Rigid Endoscope
Related Resource for reference
 |
 |
Related Products
Endoscope Micro Lenses
Endoscope Cone Lens
Endoscope half ball lens, drum lens
